Neopower Blog | Knowledge | Favorite | Home | SiteMap
Thunder Series Industrial Voltage Stabilizer
Thunder Series Industrial Voltage Stabilizer
Share |
SCR SOLID STATE VOLTAGE STABILIZER SYSTEM

With ultra fast response speed and contact-less design, ideal for highly sensitive & mission critical loads & applications

FEATURES:
● Ultra fast response speed
Less than 40ms
● Contact-less Design
No carbon brush, no motor & free of maintenance
● Wide Range of Power Ratings
Three Phase up to 2000KVA
● Wide Input Voltage Swing Range
Input Range: ±15% (R15), ±20% (R20), ±25% (R25),±30% (R30), ±35% (R35), ±40% (R40) or to specify.
● Transient Voltage Surge Suppression
TVSS: Protect loads from harmful high energy surges,Transient voltage and spikes.
● High Efficiency
Better than 98% for low cost operation.

NPT (Thunder) Series
SCR SOLID STATE DESIGN
AC VOLTAGE STABILIZERS & REGULATORS
THREE PHASE - 10KVA~800KVA

SAY GOODBYE TO UN-STABLE AC MAINS VOLTAGE

AC mains voltage fluctuations will cause erratically behave & malfunctions on electronic equipment.Some systems may even break down due to voltage fluctuations, transient voltage, sags or spikes. Failure to ensure the incoming mains voltage is constant and clean can often result in expensive electronic devices repairs, data loss and unplanned down-time. NOW let’s say goodbye to such headaches by equipping with NEOPOWER voltage stabilization system.

NEOPOWER® Voltage Stabilizers offer NEO Solution For Your POWER™

● Ultra Fast Response Speed & Solid State Design
Outstanding ultra fast response speed of less than 40ms & brings exceedingly quiet in operation,thanks to the SCR solid state design & make it without moving parts & free of maintenance.

● Voltage Protection & Stabilization
Suitable for more than 98% applications of electrical & electronic devices, NEOPOWER NPT series voltage stabilizers keep monitoring the incoming voltage supply all the time. When the input voltage get rises or drops, the voltage stabilizers will correct the output voltage with ultra fast speed within 40ms to make sure delivering the constant ideal voltage to the load equipment. With inbuilt transient voltage surge suppression (TVSS), they also protect electrical and electronic load equipment against vital high energy power surges, transient voltage and spikes. 

● Reliability, Durable & Free of Maintenance
With incredible wide input voltage range options and ultra fast response ability, NEOPOWER NPT series with SCR solid state design continuously proved as one of the most durable & dependable voltage stabilizers for the highly sensitive & mission-critical loads & applications.

● A Never Stop Pursuing Vision
After equipped with NEOPOWER® products, people are no longer tormented by the poor power quality during their daily life, production and work.

● Independent Phase Correction Control System
Independent phase voltage balancing and control system to ensure stable individual phase voltage even if load unbalance.
● Over & Low Voltage Protection
Able to shutdown the voltage stabilizer when the input voltage going outside of the input voltage range.
● Inbuilt High Overload Capacity
Ideal for the loads with an initial high current draw on start up.
● Soft Start Up Load Protection
Protection of the load from momentary over voltage situations on start up.
● Automatic Restart Ability
Able to restart automatic after the mains power recover.
● Input Circuit Breaker
Equip with a circuit breaker as input over current protection device as standard.
● Phase Failure Protection
Protection of the even of phase failure.
● Manual By-pass System
Able to work in By-pass mode by the failure of stabilizer when requires a urgent grid power or maintenance.
● Front Panel status Monitoring & Metering
Front panel display showing system status with output voltmeter with phase selector switch.
● Optional Accessories
Output Circuit Breaker, Main Circuit Filtering System, Over-heating Sensor, Ammeter with Phase Selector Switch, Fan Cooling System, No Volt remote Monitoring Contacts, Multi-task Power Meter (with RS-485 interface option) & Lightening Arrestors.

AVAILABLE VOLTAGE CHOICES


H DESIGN INPUT VOLTAGE RANGE OPTIONS

When there is a reasonable good AC mains, a NEOPOWER voltage stabilizer with an input variation range of ±15% (R15 Models) will usually be more than acceptable, but in more remote locations, or countries where the national supply infrastructure is less developed, variations of ±20% or greater may be needed to be accommodated by the NEOPOWER voltage stabilizer.
Please Take a Note – These voltage stabilizers are not designed to support / protect voltage “back feeding” applications, where energy is required to be also fed back into the mains supply. 


H DESIGN NPT-H-3P-R* Input Voltage Range & Output Accuracy 


TECHNICAL SPECIFICATION 



PRODUCT SELECTION TABLE

Relative Products
250KVA SCR Voltage Regulator
250KVA SCR Voltage Regulator
SPW TPW6B SCR Voltage Stabilizer
SPW TPW6B SCR Voltage Stabilizer
Industrial Voltage Stabilizer
Industrial Voltage Stabilizer
Warrior Series Industrial Voltage Stabilizer
Warrior Series Industrial Voltage Stabilizer
Thunder Series Industrial Voltage Stabilizer
Thunder Series Industrial Voltage Stabilizer
Raptor Series Industrial Voltage Stabilizer
Raptor Series Industrial Voltage Stabilizer
Email:
Country:
Full Name:
Facebook Linkedin
Twitter Youtube
Voltage Stabilizers Automatic Voltage Stabilizer Transformer Based Online UPS
Industrial Voltage Stabilizer Single Phase Voltage Stabilizer Transformer Less Online UPS
Voltage Stabilizer for Home Three Phase Voltage Stabilizer Line Conditioner
Industrial Online UPS Automatic Voltage Switcher Online UPS
HOME  |   ABOUT US  |   SERVICES  |  FAQs  |  SITE MAP  |   TERMS & CONDITIONS  |   TECH SUPPORT  |  CONTACT  |  RESOURCES
Address: 5F, XingYe Bldg., Xing Ye Rd., Liushi, Wenzhou, Zhejiang, P.R.CHINA 3256044 Email:Sales@NeoPower.hk Tel:0086 577 27852875/27876782 Fax:0086 577 27876752 ©2010-2017 NEOPACK INTERNATIONAL LIMITED All Rights Reserved