Neopower Blog | Knowledge | Favorite | Home | SiteMap
Three Phase UPS Systems For IT Applications
Three Phase UPS Systems For IT Applications
Share |
Key Features(Three Phase UPS Systems For IT Applications 3:3):
High reliability configuration
Double conversion online design, clean sine wave sources, frequency tracking, phase-locked, voltage regulation, low distortion, no power fluctuation interference, bypass mode available, built-in manual maintenance bypass switch, auto mode-switching by interlocks, unattended operation, cold start function.

N+X parallel redundancy
Unbalanced-rating paralleling technology, up to 8 paralleled units, auto load-sharing, flexible configuration & updating.

Wide input range 
Input voltage range up to 20%, low battery mode switching frequency, long battery life, 45Hz ~ 65Hz auto sensing , high compatibility with local generators.

Digital Control
2 DSP control units, intelligent battery management technology, auto battery floating charge switching, I/O voltage settings available through control panel.

Stable operation
Stable & continuous power supply available under extreme grid conditions, SPWM technology, 6th generation IGBT module, optional isolation transformer, transformer based configuration, phase-loss resistance.

Comprehensive protection
Output overload & short-circuit protection, battery fault & under-voltage protection, battery over-charging protection, inverter over-temperature protection, auto bypass mode switching, self-diagnosis function, remote EPO function.

User-friendly communication
Optional LED / LCD display, status & statistics of operation display, optional RS232 / RS485 interface, external SNMP adapter, remote monitoring & management availa
ble.

Technical Specifications (Three Phase UPS Systems For IT Applications 3:3):

Model

NP3300 Series Transformer Based Design

Capacity

10KVA~500KVA

Input Voltage

380VAC/400VAC/415VAC -/+ 20% (3 phase) or customized.

I/O Frequency

40Hz ~ 65Hz (auto sensing)

THD

<1% (linear load), <3% (non-linear load)

Crest Factor

3 : 1

Output Voltage

380VAC/400VAC/415VAC (3 phase + neutral) or customized

Power Factor

0.8 (optional 0.9)

Overload Ability

60’ / 10’ / 1’ (110% / 125% / 150%)

Battery Voltage

192VDC (optional 240VDC / 384VDC / 480VDC)

Transfer Time

0ms

Display

LED (optional LCD)

Interface

RS232 / RS485 (optional intelligent slot / Dry Contact)

Standards

EMI: IEC62040-2; EMC: IEC61000-4

Note: IP22 enclosure (optional IP55 enclosure for outdoor use); optional voltage 110VAC -/+15%; optional isolation transformer, surge protector.

For more information about NeoPower Three Phase UPS Systems For IT Applications, please send inquiry to sales@neopower.hk.

Relative Products
NeoPower Industrial UPS Systems
NeoPower Industrial UPS Systems
Industrial Online UPS Systems
Industrial Online UPS Systems
3 Phase UPS Systems For Industrial Applications
3 Phase UPS Systems For Industrial Applications
Three Phase UPS Systems For IT Applications
Three Phase UPS Systems For IT Applications
Email:
Country:
Full Name:
Facebook Linkedin
Twitter Youtube
Voltage Stabilizers Automatic Voltage Stabilizer Transformer Based Online UPS
Industrial Voltage Stabilizer Single Phase Voltage Stabilizer Transformer Less Online UPS
Voltage Stabilizer for Home Three Phase Voltage Stabilizer Line Conditioner
Industrial Online UPS Automatic Voltage Switcher Online UPS
HOME  |   ABOUT US  |   SERVICES  |  FAQs  |  SITE MAP  |   TERMS & CONDITIONS  |   TECH SUPPORT  |  CONTACT  |  RESOURCES
Address: Dianhou Industrial Zone., Liushi, Wenzhou, Zhejiang, P.R.CHINA 325604 Email:Sales@NeoPower.hk Whatsapp/Tel:008618066266918 ©2010-2023 NEOPACK INTERNATIONAL LIMITED All Rights Reserved