CARBON ROLLER CONTACT DESIGN SYSTEM
With compact design, longer service life, silence operation mode & high output voltage accuracy.

General(Power Conditioner For Elevators):
Elevators play an increasingly important role in inhabitation high-rises, busy business building, and hotels. NEOPOWER designed elaborately the elevator specific power conditioner considering voltage pulsation caused by ceaseless ups and downs and frequent running and pauses of elevators. The systematic regulation adopts roller type carbon brush and high polishing processing of regulating transformer so that the friction loss of carbon brush can be reduced to less than 0.2mm every 10,000 times. In addition, swift speed of regulation resonance, impressive ability of anti load impact and flawless protection guarantee normal and cycling operation of elevator. It also has dual delayed function, by-pass function and the auto restore facility after power cut.

Features(Elevator Specific Power Conditioner):
1.Wide input voltage
2.Maintenance free roller type carbon brush
3.No additional wave distortion, no phase deviation
4.Continually operation mode and withstand to instantaneous overload
5.Protection circuit(over, under voltage and over current auto shutoff after delayed)
6.Manual by-pass function
7.Start output delayed function
8.Lightning device addition is available as request

Applications(Elevator Specific Power Conditioner):
1.Passenger Elevator
2.Cargo Elevator
3.Ropeway elevator
4.Escalator

AVAILABLE VOLTAGE CHOICES

H DESIGN INPUT VOLTAGE RANGE OPTIONS

When there is a reasonable good mains supply, a NEOPOWER voltage stabilizer with an input variation range of ±15% (R15 Models) will usually be more than acceptable, but in more remote locations, or countries where the national supply infrastructure is less developed, variations of ±20% or greater may be needed to be accommodated by the NEOPOWER voltage stabilizer.
Please Take a Note – These voltage stabilizers are not designed to support / protect voltage “back feeding” applications, where energy is required to be also fed back into the mains supply.

H DESIGN NPR-H-3P-R* Input Voltage Range & Output Accuracy


TECHNICAL SPECIFICATION 


PRODUCT SELECTION TABLE